A presence sensor detects more than motion: it also knows whether someone is in the room while they are sitting still or sleeping. That makes it the basis for almost every automation in the smart home: lighting, heating, ventilation and security follow actual presence instead of schedules. Here you will find the most important room monitoring applications and which Senvolon presence sensor suits them.
Your benefits at a glance
Presence detection
Detects not only motion but also people sitting still or sleeping.
Zones and people
All models distinguish zones by distance; the KL MZ detects up to 4 people in freely drawn zones.
Flexible mounting
Wall or ceiling mounting for the right coverage in each room.
For automations
Lighting, heating, ventilation or devices switch automatically by presence.
Fewer false alarms
Radar does not react to sunlight or radiator heat and is more precise than PIR; moving curtains or fans can be masked out with zones.
Easy integration
Via MQTT in Home Assistant, ioBroker, openHAB or Node-RED, no hub.

Lighting by presence
The light comes on when someone enters the room and stays on as long as someone is there, even while reading on the sofa. With the built-in brightness sensor it only switches when it is dark enough. With the KL MZ you can also control the light per zone, for example only above the dining table.
Suitable presence sensors: Basis, KL or KL MZ
Step by step: lighting control in Home Assistant, with automations

Heating and ventilation by room climate
In addition to presence, the KL, KL LD and KL MZ measure temperature, humidity and air pressure. This lets you monitor the room climate, heat only rooms where someone is present and control by the temperature where you are sitting. If humidity rises in the bathroom or bedroom, the fan starts and runs until the value is right again. No second sensor is needed.

Security without a camera
If the presence sensor detects someone while nobody should be at home, it reports this to Home Assistant, you receive the alarm on your phone, and the built-in siren can sound. Because it works with radar, it needs neither a camera nor a microphone and is also suitable for bedrooms and bathrooms.
Suitable presence sensors: Basis, KL or KL MZ
Step by step: alarm system in Home Assistant, with automations
Simulating presence on vacation
Instead of a timer, Home Assistant switches the light according to the brightness measured by the presence sensor and waits a random time before doing so. No two evenings look the same, and the alarm system stays armed the whole time.
Suitable presence sensors: Basis, KL or KL MZ
Step by step: presence simulation in Home Assistant, with automations

Which presence sensor for which application?
| Basis | KL / KL LD | KL MZ | |
|---|---|---|---|
| Lighting by presence | yes | yes | yes, also per zone |
| Heating and ventilation by room climate | no room climate sensor | yes | yes |
| Alarm with siren | yes | yes | yes, also per zone |
| Several people, freely drawn zones | no | no | yes |
All models compared: Presence sensors
Frequently asked questions
Does the presence sensor detect several people?
The KL MZ detects up to 4 people and assigns them to zones. The Basis, KL and KL LD report whether someone is in the room and the distance of the last person detected.
Does radar react to sunlight or heat from radiators?
No. Unlike an infrared motion detector, radar does not react to light and heat. It can, however, pick up moving objects such as fans or curtains; you mask these spots out with zones and sensitivity.