Corner & wall mount for Senvolon presence sensors: base disc on the magnetic ball joint, wall bracket below, for walls and room corners
Room from above: on the wall the corners next to the device stay uncovered, from the room corner the sensor often covers the whole room
Presence sensor in the room corner on the corner & wall mount, cable running down
Three directions: line for a flat wall, left triangle for the right corner, right triangle for the left corner
View from below: ball joint on the wall bracket in the corner
Presence sensor in a room corner above a houseplant, the cable runs down the wall
Scope of delivery: wall bracket with magnet 40 × 56 mm, base disc Ø 55 mm pre-assembled, 2 M3 × 8 screws; adhesive pads and wall screws not included
Corner & wall mount for Senvolon presence sensors: base disc on the magnetic ball joint, wall bracket below, for walls and room corners
Room from above: on the wall the corners next to the device stay uncovered, from the room corner the sensor often covers the whole room
Presence sensor in the room corner on the corner & wall mount, cable running down
Three directions: line for a flat wall, left triangle for the right corner, right triangle for the left corner
View from below: ball joint on the wall bracket in the corner
Presence sensor in a room corner above a houseplant, the cable runs down the wall
Scope of delivery: wall bracket with magnet 40 × 56 mm, base disc Ø 55 mm pre-assembled, 2 M3 × 8 screws; adhesive pads and wall screws not included

Senvolon Corner & Wall Mount for Presence Sensors, Magnetic Ball Joint

14,00 € including tax

SKU: SEN186

From the corner, the presence sensor sees more of the room.
The corner and wall mount angles the sensor into the room from the corner, and on a flat wall it points straight ahead and slightly down. The sensor hangs on a magnetic ball joint: you aim it by hand and can take it off at any time.

  • For room corners and flat walls: angled left, angled right or straight ahead
  • Screw on or stick on, take the sensor off without new holes
  • Fits all Senvolon presence sensors: KL, KL LD, KL MZ and Basis
  • Developed and made in Germany

Together with the KL and KL LD, the KL MZ or the Basis as a variant for €10 instead of €14.

In stock, delivered within 2-4 business days

Quantity:
- +
Fast & secure payment with
American Express
Apple Pay
EPS
Google Pay
Klarna
Maestro
Mastercard
PayPal
Shop Pay
Union Pay
Visa

Description

Wall bracket: 40 × 56 mm, with magnet and rubber ring as a brake, two screw holes

Base disc: Ø 55 mm, with ball plate, 20 mm steel ball and locking nut, pre-assembled

Directions: three (line straight ahead for a flat wall, triangle left or right for a corner), fine adjustment by hand at the joint

Fixing to the sensor: two M3 × 8 screws (included) or double-sided adhesive pad (not included)

Fixing to the wall: two countersunk screws 3.5 to 4 mm with wall plugs or double-sided adhesive pad (not included)

Distance in a corner: 4 cm from the adjacent wall recommended for the full swivel range, closer with a smaller range

Use: walls and room corners indoors, not for ceilings

Fits: Senvolon presence sensors KL, KL LD, KL MZ and Basis

Installation and integration

Fits all Senvolon presence sensors: KL and KL LD, KL MZ and Basis.

Mounted in a few minutes
The base disc goes in the middle of the back of the sensor, stuck on or fixed with the two included M3 × 8 screws. Stick or screw the wall bracket to the wall; in a corner, ideally 4 cm from the adjacent wall; closer is possible, but the sensor can then swivel less far. Then place the sensor with its ball on the magnet and aim it. You change the direction later on the base disc, without removing the bracket. Where a presence sensor works best: Mounting a presence sensor

Package contents

  • Wall bracket with magnet
  • Base disc with ball plate, pre-assembled (steel ball, locking nut)
  • 2 M3 × 8 screws
  • Quick start guide

Presence sensor not included. Adhesive pads, screws and wall plugs for the wall not included.

Downloads & Support

English-speaking support (info@senvolon.de and support@senvolon.de).

FAQ

Frequently Asked Questions

Answers to frequently asked questions.

What warranty do you offer on your products?

We grant a three-year warranty on all our products. This covers manufacturing and material defects.

How long does shipping take for my order?

The delivery time of your order depends on your location and the shipping method chosen. We usually ship orders within one business day of receiving them. Standard delivery in Germany usually takes 1-2 business days. Express options are available on request for an additional fee.

How can I contact customer service if I have questions or need support?

Our experts are happy to support you with advice and hands-on help to make sure you get the most out of our products.

You have the following options to contact our support: